DRKRW-300MT-3 HDT VICAT Tester

DRKRW-300MT-3 HDT VICAT Mohlahlobi

Kakaretso:

Haholo-holo e sebelisetsoang ho lekanya mocheso oa mocheso oa mocheso le mocheso oa mocheso oa Vicat oa lisebelisoa tse seng tsa tšepe tse kang lipolasetiki, rabara e thata, nylon, lisebelisoa tsa ho kenya motlakase, lisebelisoa tse telele tse matlafalitsoeng tsa fiber, matla a phahameng a thermosetting laminated, joalo-joalo Ho bonolo ho sebetsa le e laoloa ka nepo, ke sesebelisoa sa tlhahlobo se bohlale haholo se sebelisoang haholo likolecheng, litsing tsa lipatlisiso, le litsing tsa taolo le tlhahlobo ea boleng ba lihlahisoa.

Litekanyetso tsa liteko:

Kopana le litlhoko tsa GB/T 1633, GB/T 8802, GB/T 1634, ISO 2507, ISO 75, ISO 306, ASTMD 1525, ASTMD 648 le litekanyetso tse ling.

Likarolo tsa seletsa:

Sistimi e tsoetseng pele ea taolo:

E na le botsitso bo phahameng haholo 'me ho bonolo ho e kenya, ho e hlahloba le ho e hlahloba.

Sistimi ea taolo ea software ea batho:

Etsisa li-tubes tsa dijithale ho bonts'a mocheso le phallo, le ho taka li-curve tsa liteko, ho fana ka li-curve tse hokahanyang bakeng sa taolo ea data e bohareng. E ka sekaseka lintlha tsa liteko, ea hatisa likhechana tsa liteko, lintlha tsa liteko, le litlaleho tsa liteko.

Ts'ireletso ea quadruple security:

Lisebelisoa tse ngata tsa software le lisebelisoa tsa ts'ireletso ea hardware, ho kenyeletsoa sesebelisoa sa ts'ireletso ea mocheso oa mocheso o ka holimo, mocheso oa software o ka holimo ho moeli oa tšireletso, ho emisa ka mokhoa o itekanetseng ka mor'a hore tlhahlobo e phethoe, le senotlolo sa ts'ebetso ea mookameli, ho netefatsa ts'ebetso e sireletsehileng le e tsitsitseng ea tlhahlobo.

Sistimi ea ho metha ka nepo le taolo e nepahetseng haholo:

Li-sensor tsa mocheso o phahameng oa ts'ebetso le li-micrometer tsa digital tsa capacitive grid li sebelisoa ho lekanya ka nepo liphetoho tse nyane sampuling. Algorithm e tsoetseng pele ea PID le mojule oa modulation o felletseng oa photoelectric isolation phase modulation li sebelisoa bakeng sa taolo ea mocheso, ho netefatsa hore phoso ea sekhahla sa ho phahama ha mocheso e ka tlase ho 0.5 ℃.

Tparameter ea boenjiniere

1) Lebelo la taolo ea mocheso: mocheso oa kamore ~ ​​300 ℃

2) Phoso e kholo ea mocheso: ± 0.5 ℃

3) Sekhahla sa mocheso: beha ka mokhoa o ikemetseng pakeng tsa 50 ℃/h, 120 ℃/h, kapa 50-120 ℃/h

4) Sebaka sa tekanyo ea mocheso: 1

5) Palo ea libaka tsa liteko: 3

6) Lethathamo la tekanyo ea deformation: -0.1 ~ 10mm

7) Phoso e kholo ea deformation: ± 0.005mm

8) Qeto ea ho fetola: 0.001mm

9) Nako ea tšehetso ea mohlala: 64mm, 100mm

10) E na le software e kaholimo ho ts'ireletso ea mocheso oa mocheso le ts'ebetso ea ts'ireletso ea mocheso o kaholimo (mocheso oa mocheso o romelloa ho tsoa Korea Boroa, o nang le 30A, eseng ts'ireletso ea pseudo, le matla a futhumatsang a 4000W, a ka netefatsang ho phahama ha mocheso. mocheso oa likhato tse 120 ℃/h ho isa ho tse 300);

11) Coefficient ea ho atolosa mocheso oa mochine oa sampuli ka boeona o ka tlaase ho 0.005 / 100 ℃ (ntlha ea bohlokoa, e amang ka ho toba liphello tsa liteko);

12) Mokhoa oa ho laola o amohela mokhoa oa ho laola o abuoang o nang le microcontroller le PC;

13) Bohareng bo sebelisitsoeng: oli ea methylsilicone kapa oli ea transformer;

14) Mokhoa oa ho pholisa: Pholiso ea tlhaho e kaholimo ho 150 ℃, ho pholile ka metsi ho 150 ℃ kapa ho pholile ha tlhaho.

15) Litekanyo tsa ka ntle: 800 * 600 * 800mm; Boima ba 'mele: 70 lik'hilograma

Lethathamo la litlhophiso: