Dynamic Testing Mahicne DRK-3600

Dynamic Testing Mahicne yog tsim rau Dynamic Test, Static Stiffness Test,Kev sim lub neej qaug zogthiab lwm yam.

DRK-3600 Dynamic test analyzer

Khoom npe: Dynamic test analyzer

Qauv: DRK-3600

Cov qauv siv: GB / T13937-92, GB9870-88, GB / T528, 529, 532, 2942

GB3075-82, GB/T228-2002, GB-7314-87

Ⅰ Scope of Supply

Ⅱ Cov lus piav qhia kev ua haujlwm tseem ceeb

Technical specifications:

1. Thauj khoom: 10KN, lossis lwm lub peev xwm xws li 5KN, 20KN tuaj yeem xaiv raws li cov neeg siv khoom xav tau

2. Kev vibration hais lus: +/- 50mm

3. Zaus: 100Hz

4. Servo valve: 19L / min ntsuas ntws, bandwidth ≧100Hz, daws teeb meem ≦0.5%.

5. Servo nres: anti-spin, tsis tshua muaj zog, precision nres.

6. Nrog roj siab hloov ua haujlwm.

7. Nrog kev tiv thaiv kab mob stroke.

8. Nrog roj siab, phau ntawv ob lub xauv khoom siv.

9. Ua-nyob rau hauv tsis-hu LVDT, mus ncig 100mm, nonlinearity 0.05% FS.

10. Lub caij thauj khoom yog yuam kom txuas rau lub tshuab los tiv thaiv kom tsis txhob xoob.

11. Ib qho accumulator yog ntsia ntawm txhua qhov kawg ntawm A thiab B.

12. Cov kabmob hla bar yog ua los ntawm cov alloy tshwj xeeb nrog ntau yam kev sib haum xeeb resonance tshem tawm muaj peev xwm.

13. Lub hauv paus yog nruab nrog lub ncoo los tiv thaiv kev poob siab nrog kev co coefficient theem nrab vibration absorption.

14. Nyob rau hauv 14.30HZ thiab siab dua 50HZ ob theem vibration absorber nrog txawv resonant zaus

15. Load element: qaug zog disc hom load caij

ib. Peev xwm: 10KN.

b. Qhov tseeb: 0.04%.

c. Qhov ntsuas kub sib txawv: 0.015% / ℃.

d. Daim ntawv thov kev taw qhia: rub thiab nias.

e. Kev kho yuam kev: ≦1%.

Kev txav chaw sensor: Nres Built-In LVDT (LVDT-built-in)

Ø DC hom

Ø nonlinearity: ± 0.25% FS

Qhov siab: ± 50mm

16. Qhov chaw ua haujlwm zoo: qhov chaw nro 0-500mm,

Qhov kev ncua deb ntawm tus ncej sab laug thiab txoj cai yog 400mm.

17. Lub hauv paus thiab workbench yog ob chav coaxial extension qauv los xyuas kom meej qhov ruaj khov ntawm cov qauv.

18. Zaub ntau lossis axis ntau yam: 0.001-10000, tuaj yeem teeb tsa, thiab hloov kho nrog cov txheej txheem xeem.

19. Cov qauv tsim muaj zog thiab ruaj khov, uas tuaj yeem ua kom ntseeg tau qhov kev ua tau zoo hauv kev ua haujlwm ntev ntev, thiab kev pabcuam lub neej ntawm tag nrho lub tshuab yog ntau tshaj 20 xyoo.

Roj siab unit

Lub cev muaj zog: 3 theem, 15HP. Lub zog ua haujlwm puv, suab nrov tsis tshaj 65db

l Tank: Muaj peev xwm 320 l, stainless hlau thawv.

l Lub twj tso kua mis: 19L / Min, ua haujlwm siab 210kg / cm2. Flow tus nqi 19L / min

l Lub cev muaj zog: 60 l.

l Lim lim: 5 micron.

l l Ua pa: 5 micron.

l Cov cua txias: nrog cua txias dej / cua txias ob chav hydraulic roj ncig cua txias.

l nrog overtemperature tiv thaiv ntaus ntawv.

l l nrog cov khoom siv tiv thaiv roj tsis txaus.

l l muab cov roj tsawg thiab kev tiv thaiv overcurrent

l l nrog lim clogging tiv thaiv ntaus ntawv.

l ywj siab tswj qhov system nrog cov cuab yeej tshem tawm cua sov.

Data capture system

ib. Force sensor teeb liab amplifier: magnification adjustable: 10 zaug, 5 zaug, 2 zaug, 1 zaug

b. Analog-rau-digital converter

Ø Kev daws teeb meem: 16 ntsis

Ø Nonlinearity: = 3 LSB (qis tshaj)

Ø Bandwidth: 200KHz

c. Digital rau analog converter

Ø Kev daws teeb meem: 16 ntsis

Ø Nonlinearity: ± 3 LSB (qis tshaj)

Ø Bandwidth: 25 KHz

Kev hloov pauv sensor

ib. Ib qho kev sib dhos Circuit Court analog tso zis (0-10V)

b. Cov khoom siv tsis sib cuag

c. Txhim kho nonlinear yuam kev thiab nce suab nrov piv

d. Yooj yim rau nruab connectors

e. Dav kub ua haujlwm ntau yam

f. Tsis muaj kev cuam tshuam thiab kev vibration

g. Zoo heev hydraulic servo tswj muaj peev xwm

h. Ua raws li cov cai tswj xyuas zaum kawg

i. Intelligent controller nrog zoo affinity

j. Nrog kev hloov kho tsis siv neeg thiab kho ua haujlwm txhua lub sijhawm

k. Nws tuaj yeem hloov pauv hauv lub sijhawm tiag tiag thaum lub sijhawm ua haujlwm los kho cov kev tswj tsis tau

l. Tsis siv neeg kho ntawm static zero offset yuam kev

m. Kev nyem nyem nrog kev kub ceev teb

n. Tsis muaj consumables, tsis tu

o. 32-ntsis DSP kev ua haujlwm ua haujlwm

p. Txais 2-axis tswj kev kho

q. Cov lus teb zaus ntau dua 3,000Hz

Ntau zaus tsim qhov chaw tswj

a. Internal sampling mem tes:

(a) zaus: 50MHz

(b) Qhov tseeb: ± 50ppm

b. Sab nraud input mem tes:

(a) Ntau zaus: 0.1Hz ~ 50MHz

(b) Qib: TTL

c. Analog tso zis:

(a) Tus naj npawb ntawm cov channel: 1

(b) Amplification daws teeb meem: 12 ntsis

(c) Sau npe sau: 40 ntsis

d. Ntau zaus:

(a) Hom nthwv dej: DC ~ 2MHz

(b) Chord wave type: DC ~ 20MHz

(c) Square yoj hom: DC ~ 20MHz

e. Kev daws teeb meem zaus: 1MHz

f. Input obstruction: 50 ohms (kev siv dav)

g. Amplification ntau yam: 100mv rau 10Vpp (hauv qab 50 ohm obstruction)

h. Off-load voltage ntau: 0 ~ ± 5V nyob rau hauv kev cuam tshuam ntawm 50 ohms

i. Synchronization teeb liab tso zis theem: TTL

j. Chij teeb liab tso zis theem: TTL

k. Pulse dav: 10 sampling cov ntsiab lus ib lub voj voog mem tes

l. Qib theem: TTL

m. Yam tsawg kawg nkaus mem tes dav: 20ns

n. Trigger teb hom: ua ntug nce ntu

o. Built-in yoj hom module database: hlua yoj, daim duab peb sab yoj, square yoj, mem tes nthwv dej, oblique yoj

p. Qhov chaw nco tsim los ntawm cov qauv yoj: 4 megabits

q. Txoj hlua yoj yoj lub suab nrov piv piv:

(a) DC rau 1MHz: -50 DBC

(b) 1MHz txog 10MHz: -40 DBC

(c) 10MHz txog 20MHz: -30 DBC

r. Cov nyhuv lim: 20MHz, 9-ncej conjugate curvature ntau

Square yoj, mem tes nthwv dej: sab sauv ntug / sab ntug qis lub sij hawm: <20ns, thaum nyob rau hauv lub amplification ntau ntawm 10% ~ 90%

Software

1. Lub npe software:dynamic test analyzer kev khiav hauj lwm software (xws li dynamic, zoo li qub, qaug zog peb xeem units)

2. Software ua haujlwm:

(1) Cov haujlwm tseem ceeb:

ib. Qhov pib thiab nres cov xwm txheej ntawm qhov kev xeem tuaj yeem teeb tsa.

b. tuaj yeem teeb tsa kev txiav txim siab qaug zog thiab sab sauv thiab sab qis tsis siv neeg txiav txim siab GO / NG,

c. Tus nas qhia tus nqi ntawm ib qho taw tes ntawm qhov nkhaus.

d. Lub zog, elongation xoom muaj nuj nqi

e. Kev ntxhov siab xoom kho muaj nuj nqi

f. Tsis siv neeg kho muaj nuj nqi

g. Kev xeem hom tuaj yeem xaiv tau dawb

h. Kev ntsuas lub sijhawm tiag tiag thiab kev tshuaj xyuas cov ntaub ntawv cuam tshuam

q. Waveform teeb liab generator, sine yoj, daim duab peb sab yoj, square yoj, thiab lwm yam.

r. Tag nrho digital tswj system thiab tswj software.

s. Kev tswj qhov system yog yooj yim los nthuav, yooj yim los tswj, nrog xoom, ntau yam thiab tau txais kev hloov kho tsis siv neeg thiab cov nyiaj them poob haujlwm.

t. Nrog rau kev teeb tsa, lub sij hawm qaug zog nres, sensor calibration thiab txwv kev teeb tsa ua haujlwm.

u. screen zaub load tus nqi thiab nkhaus, tswj waveform, nrog taug qab kev ntsuas, ncov txuag, tsis siv neeg ua cov ntaub ntawv xeem, kos duab thiab luam ntawv zog.

v. Programmable kev soj ntsuam xyuas, kom lub tshuab tuaj yeem tsim cov kev txawj ntse sai lossis nres qhov kev xeem, nrog rau kev tiv thaiv kev ua haujlwm ntawm cov qauv, cov khoom tsim nyog tuaj yeem xaiv kom cov qauv tsis puas.

w. Kev ntsuas lub teeb liab ntawm lub sensor muaj ntau yam lim dej nyob rau hauv thaj tsam ntawm 100Hz txog 1000Hz, muab siab precision, tsis tshua muaj drift, tsis tshua muaj suab nrov.

x. Muab kev txhawb nqa kev khiav hauj lwm software, thiab muab kev hloov kho software dawb.

(2) Tsis siv neeg tiv thaiv muaj nuj nqi:

l nrog overload, tshaj tam sim no, tshaj voltage, nyob rau hauv voltage, tshaj ceev, stroke thiab lwm yam kev tiv thaiv ntau yam.

l muaj roj kub kub, roj tsawg, roj tsawg thiab kev tiv thaiv dhau tam sim no

(3) Database analysis

ib. (Test Method Database Management)

b. (Peak Value Real-Time Display)

c. (Real Time Display Diagram)

> (Load vs Time Diagram)

> (Displacement vs Time Diagram)

> (Load vs Displacement Diagram)

> (Load vs Displacement vs Time Diagram)

d. (Data Storage Strategy)

e. (Report Editor)

f. (Data Analysis)

g. Cov ntaub ntawv khaws cia: real-time online tsis siv neeg kaw tuaj yeem sau txog 10,000 nthwv dej

(4) Data acquisition system

ib. Sensor teeb liab amplifier: adjustable magnification, × 10, × 5, × 2, × 1

b. Analog rau Digital converter:

Kev daws teeb meem: 16 Bits

Nonlinearity: ± 3 LSB (qis tshaj)

mBandwidth: 200KHz

c. Digital rau analog converter:

Kev daws teeb meem: 12 Bits

Nonlinearity: ± 1LSB (qis tshaj)

Bandwidth: 25 KHz

(5) Tswj hom:

l Tsis tu ncua ceev hom.

l Tsau load hom.

l txoj kev ntxhov siab tas li.

l Tsis tu ncua strain hom.

l Cyclic test mode.

(6) Muaj cov ntaub ntawv xeem:(Cov qauv xeem tuaj yeem teeb tsa dawb raws li qhov xav tau)

● Dynamic nruj

● Static tawv

● Damping tas li

● Mechanical hysteresis nplhaib

● Tsis tshua muaj elastic

● Khaws cov khoom elastic

● Poob elastic tas li

● Poob theem (poob lub kaum sab xis)

● Kev poob qis

● Form factor

● Attenuation coefficient

● Lub neej qaug zog

● Caij nplooj ntoos hlav tsis tu ncua

(7) Control nkhaus:

l stress-time nkhaus.

l strain-time nkhaus.

l stress-strain nkhaus.

l Loop test nkhaus.

(8)Tswj spectrum:

ib. Sine Wave

b. Daim duab peb sab Wave

c Square Wave lossis lwm yam waveform xaiv tau teev tseg

III Technical data

Cov khoom siv phau ntawv ua haujlwm

Cov npe khoom seem tau muab

Khoom warranty

Daim ntawv qhia txog kev pab cuam tom qab muag

Kev tshuaj xyuas cov khoom

Lwm cov ntaub ntawv kev qhia tshwj xeeb hauv daim ntawv cog lus

IV Technical assurance thiab installation txais

1. Cov peev txheej ntawm cov khoom muab los ntawm Tus Muag Khoom ua tau raws li qhov yuav tsum tau muaj ntawm cov khoom siv hauv Annex I, thiab kev ua haujlwm ntawm cov cuab yeej ua tau raws li qhov yuav tsum tau ua thiab cov ntsuas kev ua tau zoo tau teev tseg hauv cov lus piav qhia tseem ceeb hauv Annex II.

2. Cov kev xav tau ntawm kev teeb tsa:

Chaw ua haujlwm: 3000 (W) * 5000 (L) mm

Cov khoom siv hluav taws xob: 380V, 50HZ, 60A

Cov dej txias txias: Txhim kho cov kav dej txias, dej qhov chaw muab los ntawm tus neeg yuav khoom, kom ntseeg tau tias qhov txias txias, nws raug nquahu kom siv cov dej condensate.

Hydraulic roj: Mobil 46 #, buyer tus kheej kub

3. Kev teeb tsa: Thaum tuaj txog ntawm cov khoom ntawm lub Hoobkas, tus neeg yuav khoom yuav tsum npaj cov roj, hluav taws xob, cov kav dej thiab cov rooj ua haujlwm uas tsim nyog rau kev teeb tsa cov cuab yeej thiab yuav tsum ceeb toom rau Tus Neeg Muag Khoom kom txhim kho thiab kho cov cuab yeej. Tsis pub dhau ib lub lis piam tom qab tau txais tsab ntawv ceeb toom los ntawm Tus Neeg Yuav Khoom, Tus Neeg Muag Khoom yuav tsum xa nws cov kws tshaj lij rau cov neeg yuav khoom lub Hoobkas txhawm rau txhim kho thiab kho cov twj paj nruag dawb.

4. Txais

a) Kev lees paub ua ntej tuaj txog: Tom qab cov khoom xa tuaj rau lub Hoobkas thiab cov neeg muag khoom cov neeg ua haujlwm tuaj txog, tus neeg yuav khoom thiab tus muag khoom yuav tsum sib koom ua ke cov khoom siv thiab tshuaj xyuas thiab tshuaj xyuas cov cuab yeej raws li daim ntawv cog lus; Yog tias muaj kev tsis txaus, kev puas tsuaj lossis tsis ua raws li daim ntawv cog lus pom; Tus neeg muag khoom yuav tsum kho qhov tsis sib xws nrog daim ntawv cog lus hauv ob lub lis piam.

b) Kev xa khoom thiab kev lees txais: Tom qab tus kws tshaj lij ntawm tus neeg muag khoom ua tiav qhov kev teeb tsa thiab kev debugging ntawm lub ntsuas, tus neeg muag khoom thiab tus neeg yuav khoom yuav tsum ua tiav qhov kev lees paub ntawm cov cuab yeej raws li tau pom zoo hauv daim ntawv cog lus installation thiab daim ntawv cog lus no, thiab tus neeg muag khoom yuav tsum lav. tias qhov kev ua tau zoo thiab cov kev qhia tshwj xeeb ntawm cov cuab yeej yog ua raws li cov kev txwv uas tau teev tseg hauv Daim Ntawv Pom Zoo no.

c) Kev sim ua haujlwm: Tom qab kev teeb tsa thiab kev ua haujlwm ntawm cov cuab yeej ua tiav thiab qhov kev lees paub tsim nyog, cov txheej txheem kev sim ua haujlwm yuav raug nkag. Lub sijhawm sim ua haujlwm yog ib lub lis piam. Yog tias muaj teeb meem zoo thaum lub sijhawm sim ua haujlwm, tus neeg muag khoom yuav tsum teb rau hauv 24 teev tom qab tau txais daim ntawv ceeb toom, thiab tuaj txog ntawm tus neeg yuav khoom hauv 24 teev rau kev kho thiab kho.

V Kev cob qhia kev pab cuam tom qab muag

1. Tom qab cov khoom tuaj txog ntawm lub Hoobkas, tus neeg muag khoom yuav tsum cob qhia tus neeg yuav khoom ua haujlwm thiab kev saib xyuas cov neeg ua haujlwm ntawm Tus Neeg Yuav Khoom. Tus naj npawb ntawm cov neeg ua haujlwm tau txais kev cob qhia yuav tsum tau npaj los ntawm Tus Neeg Yuav Khoom, thiab cov neeg ua haujlwm yuav tsum zoo dua yog tsim los ntawm cov tswv cuab, cov cuab yeej tu cov neeg ua haujlwm thiab cov kws tshaj lij hauv lub Hoobkas; Cov ntsiab lus ntawm kev cob qhia muaj xws li: cov khoom siv ua haujlwm thiab kev siv, kev kho tshuab hluav taws xob, kev daws teeb meem thiab kev kho mob; Lub sijhawm kev cob qhia yog 2 hnub, tom qab ua tiav ntawm kev cob qhia, tus neeg yuav khoom tau txais kev cob qhia yuav tsum muaj peev xwm ua haujlwm ntawm cov cuab yeej ntawm nws tus kheej.

2. Tus neeg muag khoom cov neeg ua haujlwm yuav tsum muab cov lus qhia ntxaws ntxaws txog cov ntaub ntawv kev kos duab, kos duab, txheej txheem thev naus laus zis, phau ntawv ua haujlwm, kev ua haujlwm ntawm cov cuab yeej siv, kev tshuaj xyuas thiab kev ceev faj, tshuaj xyuas, teb thiab daws cov lus nug los ntawm tus neeg yuav khoom, thiab ua kev tiv thaiv.

3. Tus neeg muag khoom cov neeg ua haujlwm yuav tsum muab cov neeg yuav khoom nrog cov lus qhia ua tiav thiab raug. Txhawm rau kom ua tiav qhov kev ua tiav ntawm cov haujlwm saum toj no, muab cov lus qhia tsim nyog.

4. Tus neeg muag khoom yuav tsum muab tus neeg yuav khoom nrog lub sijhawm lav zoo ntawm 12 lub hlis tom qab tau txais qhov ntsuas. Thaum lub sijhawm lav, tus neeg yuav khoom yuav tsum siv lub cuab yeej ib txwm, thiab kev kho, hloov thiab kev mus ncig uas tshwm sim vim qhov tsis zoo ntawm cov cuab yeej yuav tsum yog tus muag khoom. Lub sijhawm lav zoo ntawm cov khoom hloov tshiab yuav tsum yog ib xyoos txij li hnub hloov.