YG401D Fabric Flat Grinder (Nine-station Martindale)

YG401D Fabric Flat Grinder (Nine-station Martindale)

Instrument use:

It is used for the determination of the pilling degree of various fabrics under slight pressure and the wear resistance of fine cotton, linen and spun silk woven fabrics.

Standards compliant:

GB/T4802.2-2008, GB/T13775, GB/T21196.1, GB/T21196.2, GB/T21196.3, GB/T21196.4; FZ/T20020; ISO12945.2, 12947; ASTM D 4966, 4970, IWS TM112, can add ball-on-disk test function (optional) and other standards.

Features:

1. It is operated with a large color touch screen, and the interface is humanized; it is equipped with a Chinese and English bilingual operating system;

2. Multiple sets of operating programs can be preset, and multiple sets of samples can be carried out at the same time;

3. Parameters such as the independently accumulated friction times and counting times of each station are managed by the window in a unified manner. There are two modes of increasing and decreasing. After the predetermined number of times is reached, you can choose to continue to accumulate or stop counting;

4. Servo drive and motor, with stable and adjustable speed, and extremely low operating noise;

5. The instrument is equipped with two circular motion tracks with diameters of Lissajous 24mm and 60mm;

6. One sampling plate: inner diameter 38mm, outer diameter 140mm, convenient for sampling;

7. Special aluminum profile position control cover, stainless steel weight, grinding head and grinding disc;

8. Imported linear bearings reduce the friction resistance of the guide rod and ensure that the grinding head keeps rotating during the friction process;

Technical parameter:

1. Number of stations: 9 stations;

2. Count display: a. Estimated count: 0~999999 times; b. Accumulated count: 0~999999 times;

3. Grinding head and weight quality:

⑴Mass of small grinding head: 198g; ⑵Mass of large grinding head: 155g; ⑶Heavy hammer: 260±1g;

⑷Clothing sample weight: 395±2g; ⑸Furniture decoration sample weight: 594±2g;

4. Effective friction diameter and quantity of grinding head: small grinding head Φ28.6mm, 9 pieces; large grinding head Φ90mm, 9 pieces;

5. The relative movement speed between the holder and the grinding table: (20～70)±2r/min;

6. Mass and diameter of sample loading hammer: 2.5±0.5Kg, 120mm;

7. Dimensions: 900mm×550mm×400mm (L×W×H);

8. Weight: 120kg;

9. Power supply: Ac220V, 50Hz, 600W;

Configuration list:

1. Host 1

2. 2.5Kg sample loading hammer 1

3. Pressure hammer: 395g, 594g, 9 pieces each

4. One sampling plate: inner diameter 38mm, outer diameter 140mm

5. 9 pieces of ￠90 woven felt and ￠140mm woven felt

6. ￠140mm standard abrasive 18 pieces

7. Polyurethane foam: ￠38×3mm 45 pieces

8. 18 rubber rings for sample loading

9. Product certificate 1 piece

10. Product instruction manual 1 copy

11. Invoice 1

12. 1 piece of acceptance form

13. Product picture book 1 copy

Optional list

1. 9 large grinding heads

2. 9 heavy hammers 260g

3. Z01A manual disc sampler (∮140mm) 1 set

4. Z01C manual disc sampler (∮38mm) 1 set

5. One special brush for curves