Stacking compression test is a test method used to assess the ability of cargo packaging to withstand pressure during stacking storage or transportation.
By simulating the actual stacking situation, a certain amount of pressure is applied to the packaging for a period of time to check whether the packaging can maintain its structural integrity and protect the contents from damage.
Stacking testing is very important to ensure the safety and stability of products in warehousing and transportation, and can help enterprises optimize packaging design, reduce costs, and reduce the risk of damage to goods.
The following are the general steps for stacking compressive test:
(1) Prepare test samples: select representative packaging samples to ensure that they are in good condition and have no obvious defects.
(2) Determine the test conditions: including stacking height, duration, temperature and humidity and other environmental conditions. These conditions should be set according to the actual storage and transportation situation.
(3) Install Compressive test equipment: use a professional stacking compressive test machine, place the sample on the test platform, and fix and adjust it according to the requirements.
(4) Apply pressure: according to the predetermined stacking height and weight, gradually apply vertical pressure to the sample.
(5) Monitoring and recording: During the test process, pressure sensors and data acquisition systems are used to monitor changes in pressure in real time and record relevant data, such as maximum pressure, pressure change curve, sample deformation, etc.
(6) Holding time: After reaching the predetermined pressure, maintain a certain time to simulate the continuous force under the actual stacking state.
(7) Check the sample: After the test, carefully check the appearance and structure of the sample to see if there is damage, deformation, leakage and other conditions.
(8) Analysis results: According to the test data and sample inspection, evaluate whether the stacking compressive performance of the sample meets the requirements, and draw a conclusion.
It is important to note that specific testing methods and standards may vary depending on the industry, product type and relevant regulations. The corresponding standards and specifications should be followed when the stacking compression test is carried out.
DRK123 Compressive test equipment
Send your message to us:
Post time: Oct-14-2024
