The carton compression tester is a professional testing machine for testing the compression performance of cartons. It is suitable for compression testing of corrugated boxes, honeycomb boxes and other packaging boxes. And it is suitable for the compression test of plastic barrels (edible oil, mineral water), paper barrels, cartons, paper cans, container barrels (IBC barrels) and other containers.
Common faults and troubleshooting methods of carton compression machines: The failure of the testing machine is often manifested on the computer display panel, but it is not necessarily a software and computer failure. You should analyze it carefully, pay attention to every detail, and provide as much as possible for the final troubleshooting. much information.
Follow these troubleshooting methods in order:
1. The software often crashes:
Computer hardware failure. Repair the computer according to the manufacturer’s instructions. Software failure, contact the manufacturer. Whether this situation occurs during file operations. There was an error in the file operation and there was a problem with the extracted file. See each chapter for instructions on file operations.
2. The zero point display of the test force is chaotic:
Check whether the ground wire (sometimes not) installed by the manufacturer during debugging is reliable. The environment has changed a lot. The testing machine should work in an environment without obvious electromagnetic interference. There are also requirements for the temperature and humidity of the environment, see the host manual.
3. The test force only shows the maximum value:
Whether the calibration button is pressed. Check each connection. Check whether the AD card configuration in “Options” has changed. The amplifier is damaged, contact the manufacturer.
4. The stored file cannot be found:
The software has a fixed default file extension by default, whether another extension is input when saving. Whether the stored directory has changed.
5. The software cannot be started:
Check whether the software is installed on the parallel port of the computer. Close other software programs and restart. The system files of this software are lost and should be reinstalled. The system files of this software are damaged and should be reinstalled. Contact the manufacturer.
Send your message to us:
Post time: Jun-29-2022
