DRICK Ceramic Fiber Muffle Furnace adopts cycle operation type, with nickel-chromium wire as the heating element, and the operating temperature in the furnace is more than 1200. The electric furnace comes with intelligent temperature control system, which can measure, display and control the temperature in the furnace. And keep the temperature in the furnace constant. The resistance furnace is made of new type refractory insulation fiber material, which has the characteristics of fast heating, light weight, high efficiency and energy saving. For laboratories, industrial and mining enterprises, scientific research units, do elemental analysis and general small steel parts quenching, annealing, tempering and other heat treatment heating.
DRICK Ceramic Fiber Muffle Furnace maintenance and safety precautions:
1, in the operation of the electric furnace, the temperature in the furnace is strictly prohibited to exceed the maximum use temperature of the equipment, in order to extend the service life of the equipment, the long-term working temperature should be 50 degrees lower than the rated temperature.
2, reduce the number of times to open the furnace door in the work, avoid the temperature in the furnace cold and hot, protect the integrity of the furnace.
3, the furnace door should be opened and closed gently, and the workpiece should be handled gently to avoid damage to the furnace and furnace. When taking and placing the heated workpiece, the power supply should be turned off first to ensure personal safety.
4, when the thermocouple or temperature control instrument is damaged and needs to be replaced, it should be ensured that the thermocouple and the instrument are consistent, otherwise it will cause the temperature of the furnace and the temperature control instrument to be inconsistent, and the electric furnace will burn down in serious cases.
5, it is forbidden to pour liquid directly into the furnace, and often clean the iron filings and oxide skins in the furnace to keep the furnace clean.
6, the electric furnace must not be placed in a strong magnetic field, strongly corrosive gas, a large amount of dust and vibration or explosive gas environment. The ambient temperature is 5-40 degrees, and the relative humidity is not more than 80%.
Send your message to us:
Post time: Aug-13-2024
