DRK710A Melt Flow Updater

Nkọwa dị mkpirikpi:

Ihe eji eji ihe eji eme ihe: A na-eji ya nyochaa ma mụọ ọnụego mgbaze nke thermoplastics n'okpuru ọnọdụ ụfọdụ. Ụkpụrụ kwekọrọ: Soro GB/T9643, GB/T3682.1, JB/T5456, ISO1133 na ụkpụrụ ndị ọzọ. Atụmatụ: 1. Iji PID nwere ọgụgụ isi okpomọkụ akara, okpomọkụ akara ziri ezi dị elu, nke nwere ike hụ na okpomọkụ dị n'elu 10 mm nke anwụ na gbọmgbọm bụ n'ime ± 0.5 ℃ 2. Isi akụkụ na-nitrided, na elu ike. , isi ike na obere nrụrụ àgwà ...


  • Ọnụ ego FOB:US $ 0.5 - 9,999 / akụkụ
  • Ọnụ ọgụgụ nke Min.100 Iberibe/Iberibe
  • Ikike inye:10000 Iberibe/Iberibe kwa ọnwa
  • Port:Shenzhen
  • Usoro ịkwụ ụgwọ:L/C,D/A,D/P,T/T
  • Nkọwa ngwaahịa

    Mkpado ngwaahịa

    Eji akụrụngwa:

    A na-eji ya nyochaa ma mụọ ọnụego mgbaze nke thermoplastics n'okpuru ọnọdụ ụfọdụ.

    Ụkpụrụ kwekọrọ:

    Soro GB/T9643, GB/T3682.1, JB/T5456, ISO1133 na ụkpụrụ ndị ọzọ.

    atụmatụ:

    1. Iji PID nwere ọgụgụ isi okpomọkụ njikwa, na okpomọkụ akara ziri ezi dị elu, nke nwere ike hụ na okpomọkụ dị n'elu 10 mm nke anwụ na gbọmgbọm bụ n'ime ± 0.5 ℃.

    2. Akụkụ ndị bụ isi bụ nitrided, nwere ike dị elu, ike siri ike na obere njirimara nrụrụ, ma hụ na izi ezi na nkwụsi ike nke data nha;

    3. The kpo oku ọsọ bụ ngwa ngwa. Onye na-ekpo ọkụ nke ngwá ọrụ na-anabata mgbanaka mmiri ọkụ pụrụ iche maka onye na-agba ọsọ na-ekpo ọkụ. Isi ihe ya na-ebubata nickel-chromium waya alloy, nke dị mma karịa ọkụ ọkụ ọdịnala.

    4. Ike akọrọ ọkụ na-eguzogide, ike dị elu, mma kpo oku uniformity na ogologo ndụ ọrụ, na-akwado ngwá ọrụ ruo ogologo oge na okpomọkụ kasị elu nke 450 ℃;

    5. Ngwá ọrụ kpo oku na-anabata modul na-achịkwa voltaji, nke nwere ike ịhazigharị voltaji na ike na oke zuru oke. E jiri ya tụnyere omenala siri ike-ala relay on-off akara, kpo oku na-esikwu ike na ngwa ngwa, nke mere na mgbe nile okpomọkụ ala nwere ike iweghachi ngwa ngwa mgbe ejuputa;

    6. The ngwá adopts a ahaziri armored platinum iguzogide okpomọkụ ihe mmetụta na kasị elu izi ezi klas A, na izi ezi bụ n'ime 0.1 ℃. E jiri ya tụnyere ihe mmetụta ọdịnala, ọ nwere njirimara nke nguzogide mmetụta, nguzogide corrosion, nguzogide vibration, na enwere ike hulata na ọchịchọ. Ogologo ndụ, nwere ike hụ na ogologo oge eji ngwá ọrụ n'okpuru okpomọkụ kacha elu nke 450 ℃ gburugburu ebe obibi.

    Toke oru:

    1. Okpomọkụ mgbe niile: ± 0.5 ℃

    2. Oke okpomọkụ: 50-450℃ 3. Oge mgbake okpomọkụ: 2min

    5. Oge izizi: 0.1S

    6. Usoro ule: usoro mma MFR, usoro olu MVR

    7. Nnwale ule: 0.1-80g / 10min (MFR), 0.1-3000g / 10min (MVR)

    8. Oge nkwụsị kacha: 999 ugboro

    9. Oge nkwụsị kacha elu: 999 sekọnd

    10. Piston mkpanaka isi dayameta: Φ9.475± 0.015mm

    11. Ike ọkụ: AC220V± 10%; 50Hz; 600W 12. Akụkụ: 53×35×56CM

     


  • Nke gara aga:
  • Osote:

  • Ụlọ ọrụ SHANDONG DRICK INSTRUMENTS CO., LTD

    Nkọwapụta Ụlọ ọrụ

    Shandong Drick Instruments Co., Ltd, na-etinyekarị aka na nyocha na mmepe, nrụpụta na ire ngwa nnwale.

    Ụlọ ọrụ ahụ malitere na 2004.

     

    A na-eji ngwaahịa eme ihe na ngalaba nyocha sayensị, ụlọ ọrụ nyocha nke ọma, mahadum, nkwakọ ngwaahịa, akwụkwọ, mbipụta, rọba na plastik, kemịkalụ, nri, ọgwụ, akwa akwa na ụlọ ọrụ ndị ọzọ.
    Drick na-aṅa ntị n'ịzụlite nkà na ụlọ otu, na-agbaso echiche mmepe nke ọkachamara, nraranye.pragmatism, na ihe ọhụrụ.
    Na-agbaso ụkpụrụ ndị ahịa na-adabere na ya, dozie mkpa ndị ahịa kachasị ngwa ngwa na nke bara uru, ma nye ndị ahịa ihe ngwọta nke mbụ na ngwaahịa ndị dị elu na nkà na ụzụ dị elu.

    Ngwaahịa ndị emetụtara

    Mkparịta ụka WhatsApp n'ịntanetị!