ASTM D2444 DRKW-112 Pipe dobe hammer mmetụta igwe nnwale

Nkọwa:

Ngwa a bụ tubing ule kacha ọhụrụ emepụtara ma rụpụta ya na ASTM D2444 maka ngwa nnwale arụmọrụ nguzogide mmetụta. Ọ dabara maka PVC-U, ọkpọkọ PVC-C, ọkpọkọ PP, ọkpọkọ PE, pipeline nkwukọrịta n'okpuru ala, maka mkpebi siri ike nke ọkpọkọ plastik. Ọ bụ ngwá ọrụ nnwale dị mma maka ụlọ ọrụ nnwale, ngalaba mmepụta, ụlọ ọrụ ihe ụlọ, nyocha sayensị. Ngwa ahụ dabara adaba maka ụzọ nnwale abụọ: usoro ngafe na usoro gradient.

Standards

Na-akwado ASTM D2444, (Nnwale maka Mmetụta Nguzogide nke Thermoplastic Pipes na Fittings site na Drop Weight Method and Act ma ọ bụ ụkpụrụ ule dakọtara).

Fihe oriri

1. The hammer lifting device adopts mbubata AC servo usoro, abụọ arụ ọrụ ọsọ, na elu-ọsọ ọsọ ọsọ bụ.

12m / min, ọsọ ọsọ na-agba ọsọ dị ala bụ 0.25m / min, arụmọrụ ule dị oke elu;

2. Nhazi pụrụ iche nke ọkpọkọ na-adaba na iyuzucha oghere na-eme ka mmetụta nke ịdaba ikuku ikuku nke hama ahụ dị ntakịrị;

3. The ebuli elu nke hama ahu nwere ike ịtọ aka ike na-akpaghị aka calibrated;

4. Ngwaọrụ mmetụta nke ụlọ akwụkwọ sekọndrị na-anakwere ihe mkpuchi ikuku pụrụ iche, nke kwesịrị ekwesị maka iji ụdị hama dị iche iche.

Enwere ike ịhazi ya n'ụzọ akaghị aka, enweghị mkpọtụ, obere ịma jijiji, ogologo ndụ ọrụ nke ngwá ọrụ; Ọnụego njide mgbochi ụlọ akwụkwọ sekọndrị gbagoro 100%;

5. A na-edozi ihe nlele ahụ na-akpaghị aka n'oge ule, nke na-eme ka arụ ọrụ na nchekwa dịkwuo mma;

6. Ejikọtara ya na igwe kwụ n'ụdị V jikọtara ọnụ, ụdị ule obosara;

7. Ejiri ngwaọrụ nchekwa nchekwa nke ọkwa atọ: nchekwa ọkụ ọkụ eletrik, nchekwa ọnụ ụlọ hammer na nchekwa ọnụ ụlọ nlele,

Chekwaa nke ọma nchekwa nke ndị ọrụ;

8. The host operation panel na-onwem na elu na ala ịgba egosi, chọpụtara na windo ọnụ ụzọ adịghị emechi mkpu egosi, sample ụzọ adịghị emechi.

Ngosipụta mkpu emechiri emechi, ihe ngosi ihe nrụnye ngwaọrụ njide nke abụọ, ihe ngosi ọnọdụ efu na nhazi mkpu nchekwa ndị ọzọ.

Usoro nka

1) Mmetụta dị elu: 50 ~ 3000mm

2) Hammer uka: 2.7kg, 5.4kg, 9.1kg, 13.6kg

3) Radius nke curvature nke hammerhead: SPH. R12.7mm, SPH. R50.8mm, SPH. R6.3mm

4) Oso na-ebuli hama kacha: 12m / min

5) Njehie ngosi: ≤±2mm

6) Dayameta ihe atụ: Φ10mm ~ Φ630mm

7) Ike ọkọnọ: (220-15% ~ 220+10%) VAC 50Hz 1.0kW

8) Nha igwe isi (ogologo × obosara × ịdị elu):

1100mm × 655mm × 5030mm

9) Nha igbe njikwa (ogologo × obosara × ịdị elu): 450mm × 400mm × 1100mm

10) Ibu otu nkeji: Ihe ruru. 500kg

11) Ibu njikwa igbe: Ihe ruru. 40kg

tumadinhazi

1) Onye ọbịa: Otu unit

2) Igbe akara eletrik: Otu nkeji

3) Ngwa na-ebuli ngwa ngwa: Otu unit

4) Ahụ hammer: Usoro iri na abụọ

5) Ụdọ ọkụ: 1

6) V-ígwè: Iberibe ise (gụnyere nnabata nnabata)

7) kposara arịlịka: Iberibe anọ

8) Mkpọchi ogbi: 1 ahịrị

9) ọkpọkọ ikuku (ikuku ọkọnọ kwesịrị ekwesị): 3 mita

Nkwupụta: Ndị ọrụ kwesịrị ịkwado ikuku compressor, ikuku ikuku kacha 1.0MPa.

Ụlọ ọrụ SHANDONG DRICK INSTRUMENTS CO., LTD

Nkọwapụta Ụlọ ọrụ

Shandong Drick Instruments Co., Ltd, na-etinyekarị aka na nyocha na mmepe, nrụpụta na ire ngwa nnwale.

Ụlọ ọrụ ahụ malitere na 2004.

A na-eji ngwaahịa eme ihe na ngalaba nyocha sayensị, ụlọ ọrụ nyocha nke ọma, mahadum, nkwakọ ngwaahịa, akwụkwọ, mbipụta, rọba na plastik, kemịkalụ, nri, ọgwụ, akwa akwa na ụlọ ọrụ ndị ọzọ.
Drick na-aṅa ntị n'ịzụlite nkà na ụlọ otu, na-agbaso echiche mmepe nke ọkachamara, nraranye.pragmatism, na ihe ọhụrụ.
Na-agbaso ụkpụrụ ndị ahịa na-adabere na ya, dozie mkpa ndị ahịa kachasị ngwa ngwa na nke bara uru, ma nye ndị ahịa ihe ngwọta nke mbụ na ngwaahịa ndị dị elu na nkà na ụzụ dị elu.