DRK-07E Fabric radiant heat protection tester

Model:  DRK-07E

Use：Used for radiant heat class C test of thermal insulation gloves, thermal insulation suits and protective boots.

Standard：ISO 6942 Test A+Test B、EN 366 、EN 407、ISO 11611、ISO 11612

Specifications：

1. Radiation source: composed of six groups of SiC heating rod, the total length of the heating rod is 356mm±2mm, the length of the heating part is 178±2, the diameter of the heating rod is 7.9±0.1mm;

2. The radiation source adopts PID temperature control, temperature control precision is ±1℃;

3. Radiation source heating capacity: maximum 1200℃±5%, using PID controller;

4. Radiation source heat radiation flux: 10 ~ 80 kW/m2;

5. The sampling frequency of data acquisition card can reach 20 HZ;

6. Equipped with commercial quartz window heat radiation flux sensor (with water circulation device), the maximum measurement range is 100KW/m2;

7. Equipped with copper plate calorimeter device, used to detect the temperature rise changes on the back of the sample;

8. Copper plate calorimeter is made of imported high conductivity pure copper without oxygen;

9. Equipped with method A type sample clip and method B type sample clip;

10. The sample moving device, can move freely on the operating platform;

11. Equipped with computer + English Windows XP operating system, test parameters are set by software, automatic start test, can automatically measure the temperature rise 12℃ and 24℃ required test time, heat flux Q and heat transfer coefficient HF;

Size(L * W * H cm)：95*66*31

Weight (kg)：110

Installation requirements：

1. Electrical requirements:  220V, 50HZ, 15A;

2. Air source requirements:  press gas

3. The test environment:  10°C ~ 30°C

4. Operation:  landing

5. Smoke discharge pipeline

Configuration：

1. Host machine;

2. One brand computer;

3. One copper plate calorimeter;

4. One radiation flux sensor for calibration;

5. Professional software test kit: First-degree burn and second-degree burn curve;

6. One copy of product manual;

SHANDONG DRICK INSTRUMENTS CO.,LTD

Company Profile

Shandong Drick Instruments Co., Ltd, is mainly engaged in the research and development, manufacturing and sales of testing instruments.

The company established in 2004.

Products are used in scientific research units, quality inspection institutions, universities, packaging, paper, printing, rubber and plastics, chemicals, food, pharmaceuticals, textiles, and other industries.
Drick pays attention to talent cultivation and team building, adhering to the development concept of professionalism, dedication.pragmatism, and innovation.
Adhering to the customer-oriented principle, solve the most urgent and practical needs of customers, and provide first-class solutions to customers with high-quality products and advanced technology.