Kjeldahl Nitrogen Analyzer DRK-K616 Automatic

Product description：

The Kjeldahl nitrogen analyzer is an instrument that calculates the protein content by measuring the nitrogen content in the sample based on the principle of constant nitrogen content in protein. Because the method of protein content measurement and calculation is called Kjeldahl method, it is called Kjeldahl nitrogen analyzer, also known as nitrogen analyzer, protein analyzer, and crude protein analyzer. The Kjeldahl nitrogen analyzer uses the Kjeldahl method to detect the content of ammonia, protein nitrogen, phenol, volatile fatty acid, cyanide, sulfur dioxide, ethanol, etc. in grains, food, feed, water, soil, silt, sediment and chemicals. It has a very good price-performance ratio, and only the titration process requires manual operation, which is very suitable for routine testing by laboratories and inspection institutions.It is widely used in the analysis of nitrogen or protein content of food, crops, seeds, soil, fertilizers and other samples. The DRK-K626 automatic Kjeldahl nitrogen determination instrument adopts the internationally accepted Kjeldahl nitrogen determination method to automatically distill nitrogen-containing samples. The fully intelligent software design allows the experimenter to easily complete the distillation of the sample within a few minutes. The complete safety system embodies the humanized wisdom of Derek. Automatic quantitative dosing of the required reagents, unattended in the whole process, intelligent detection of various states. The automatic distillation, automatic condensation, and automatic leaching system further improve the measurement accuracy. Drick equips the instrument with a multi-language version, which conforms to your language habits, and customizes the Chinese dialogue interface for Chinese users. The interface is friendly and the display information is rich, so that users can easily master the use of the instrument.

Feature：

1. 4.3-inch high-resolution color LCD display;

2. Arbitrary switching between manual and automatic dual modes;

3. Automatic quantitative filling of lye;

4. Automatic quantitative filling of boric acid absorption liquid;

5. Adding diluent in two ways, automatic and manual, to meet the needs of the experiment;

6. Distillation time can be set arbitrarily, and the end of distillation will give an alarm;

7. The automatic leaching control system realizes the intelligent leaching of the liquid outlet pipeline, which makes the measurement accuracy higher;

8. The intelligent design of the facilities around the digestive tube, including the safety protection design and the function of prompting that the digestive tube is not in place;

9. The emergency stop operation function meets the needs from time to time;

10. Intelligent design of automatic fault detection and sound and light alarm system;

11. The application of flow sensor can detect the state of condensate more accurately

12. Real-time monitoring of the heating tube temperature to ensure the safety and reliability of the experiment process

13. After the new upgrade, the performance is further improved

(1) Calibration function: dilution water calibration, alkali solution calibration, acid solution calibration, rinse water calibration;

(2) Real-time display of the working status of the protective door, digestive pipe, and condensate during the experiment;

(3) The built-in debugging mode is used to check whether the various parts of the instrument are working normally.

Technical indicators :

Range of measurement：0.1 mg to 240 mg of nitrogen

The recovery rate of ：≥ 99.5%

Determination of sample quality：Solid ≤ 6 g Liquid ≤16 ml

The distillation rate：3-6min/sample

The distillation time: 0-60min

Condensate consumption: 1.5L/min

Operating mode: Automatic/manual dual mode

Display mode: 4.3-inch high resolution color LCD screen

The power supply: 220V AC ±10% 50Hz

Rated power: 1.3KW

Dimensions (l × W × H) : 360mm x 360mmx 733mm

Net weight: 30kg